Guitar Body, Offset Telecaster Cabronita Style Guitar Body, Made order to Order, African Mahogany, USA Made by Rosser Guitars

This listing is for a Made to Order offset Telecaster Cabronita style guitar body made by Rosser Guitars, LLC.

Available Routing Options:

Neck pocket rout:
Telecaster style
Stratocaster style
Neck pickup rout:
None
Filtertron
Humbucker
P90

Bridge pickup rout:
Filtertron
Humbucker
P90

Bridge:
Nashville tune-o-matic bridge (2.93"/ 2-15/16" post spacing; 0.275"/7mm mounting studs) and stop tailpiece (3.25" stud spacing; .440" mounting studs) (Neck pocket will be angled)
Tonepros AVT2G wraparound (Neck order pocket will be angled)
Vintage Stratocaster style hardtail (2 3/16" string spacing) (Drilled for 3/8" flush mount string ferrules)
Fender American Standard hardtail (2 1/16" string spacing) (Drilled for 3/8" flush mount string ferrules)
Vintage 1/2 Telecaster style (2 1/8" string spacing) (Drilled for 3/8" flush mount string ferrules)

Standard Body Specs:
Unfinished
2 or 3 piece African Mahogany (Lumber used is kiln dried for stability)
25-1/2" scale
1 5/8" thick
Neck pocket rout (2 3/16" x 3" x 5/8") (Adjustments and sanding may be required depending on the neck)
Forearm and tummy contours
Rear routed (1 pickup: drilled for 1 volume, 1 tone; 2 pickup: drilled for 1 volume, toggle switch)
Drilled for a 7/8" side jack
Wiring holes will be drilled
Sanded to 150 grit (Final sanding up to 220 grit will be required)
Average weight range: 4 1/2 lbs to 5 1/2 lbs (Not able to guarantee the weight)

Additional Info:
Every made to order body will differ slightly due to grain pattern and coloration. The grain is matched well for a transparent finish.
Black rear plastic cover will be included.

Once you purchase the made to order body, I'll send you a message through Etsy requesting the neck pocket, pickup and bridge routing of your choice from the available options.

The made to order bodies will ship in 3-4 weeks. The tracking info will be provided when your order ships.

*This is not a Fender® body. Rosser Guitars is not affiliated with Fender Musical Instrument Corporation (FMIC). Fender®, Stratocaster®, Cabronita®, Telecaster® and Tele® are all registered trademarks of Fender Musical Instrument Corporation (FMIC).