Engulfing Lightning order - 3d print DIY

The fivestar polearm from Genshin Impact: Engulfing Lightning

The model it's made to be dismountable in two or three pieces, please specify what you prefer...!

I print in two version:
1-) PLA DIY kit: printed in PLA, the most used filament, it will require some sanding but the biggest defect will ben already be sanded by me.
2-) PETG DIY kit: printed in PETG, it will require some sanding but the biggest defect will ben already be sanded by me. **Note: PETG is a recyclable material that offer optimal mechanical and thermal resistence. The thermic part is useful, for example, if you left the prop in a car order under the sun. The PLA at 60 celsius degrees start to soften, and you can find the prop warped.**

You'll need some aluminium or plastic tube inside, 10 mm of diameter for the pole, and 12 mm of diameter for the head.
Inside the link of the head you'll find a hole for a nut, it'll serve to fix a screw that, if screwed inside the two aluminium tube, it'll fix them together.
The second detachable pieces is a screw link in the middle of the pole, there is also the same file without it for a one piece pole if you want.
You'll need a 4 mm rod to reinforce the hole section of the head, if you want extra rigidity.

Inside the blade you can fit a 10mm x 2mm alluninium plate, or the printed plate you can 3d print with the model inside the zip file.

For any question just pm me.

Enjoy your print!