Guitar Body, Unfinished Guitar Body, Made to Order, African order Mahogany, USA Made, VM Rosser Guitars

This listing is for a Made to Order VM guitar body made by Rosser Guitars, LLC.

Available Routing Options:

Neck pickup rout:
None
Filtertron
Humbucker
P90

Bridge pickup rout:
Filtertron
Humbucker
P90

Bridge:
Nashville tune-o-matic bridge (2.93"/ 2-15/16" post spacing; 0.275"/7mm mounting studs) and order stop tailpiece (3.25" stud spacing; .440" mounting studs) (Neck pocket will be angled)
Tonepros AVT2G wraparound (Neck pocket will be angled)
Jazzmaster style bridge and tremolo
Vintage Stratocaster style hardtail (2 3/16" string spacing) (Drilled for 3/8" flush mount string ferrules)
Fender American Standard hardtail (2 1/16" string spacing) (Drilled for 3/8" flush mount string ferrules)
Vintage 1/2 Telecaster style (2 1/8" string spacing) (Drilled for 3/8" flush mount string ferrules)

Standard Body Specs:
Unfinished
2 or 3 piece African Mahogany (Lumber used is kiln dried for stability)
25-1/2" scale
1 5/8" thick
German carved top
Stratocaster style neck pocket rout (2 3/16" x 3" x 5/8") (Adjustments and sanding may be required depending on the neck)
Rear routed (1 pickup: drilled for 1 volume 1 tone; 2 pickup: drilled for a toggle switch, 1 volume and 1 tone)
Drilled for a 7/8" side jack
Wiring holes will be drilled
Sanded to 150 grit (Final sanding up to 220 grit will be required)
Average weight range: 4 1/2 lbs to 5 1/2 lbs (Not able to guarantee the weight)

Additional Info:
There are several manufacturers that offer necks compatible with this body that have either a 3x3 headstock or a paddle headstock.
Every made to order body will differ slightly due to grain pattern and coloration. The grain is matched well for transparent finishes.
Black plastic rear cover(s) will be included.

Once you purchase the made to order body, I'll send you a message through Etsy requesting the pickup and bridge routing of your choice from the available options.

The made to order bodies will ship in 3-4 weeks. The tracking info will be provided when your order ships.

*Rosser Guitars is not affiliated with Fender Musical Instrument Corporation (FMIC). Fender®, Telecaster®, Jazzmaster® and Stratocaster® are all registered trademarks of Fender Musical Instrument Corporation (FMIC).