Leather Tsuba for bokken order - with box, 3-layers

Leather Tsuba for bokken - with box
Plain - no tooling, 3-layers

Brown colour and brown thread.


My Tsubas are cuted, glued (each layer) and hand sewn with very strong thread. Outside edge is beveled, rounded and
covered with fray protection.
Tsuba has three layers of leather. Its very stiff and fitm. Each layer is glued and all of them are hand sewn
together.

Thicknes of Tsuba direclty affects how stiff it will stay on your bokken, Slimmer Tsuba is more prone to move, this
one is very firm.

Each tsuba should be threaded at least from outside to keep it durable and stiff. You can chose to have not sewn
tsuba at all, layers will held by only glue itself. This may work well or may fail in short term. Its up to you how
much stronger it can be. Inner hem can make tsuba even more durable with each next bokken you put it on. Keep in
mind glueing is only for manufactureing help, and it could be insufficient for long abuse.

This one has hem inside and outside.
Front of Tsuba has Floral tooling, back of tsuba is blank with no tooling, with same quality finishing.

Tsuba comes with wooden box
118 x 118 x 59mm
4.64x 4.64 x 2.32 inch

Thicknes Tsuba:
3-layers of leather: 10-11 mm
3-layers of leather: 0.4 inch



Size Tsuba:
Cross Big - 89x96 mm
Cross Big - 3.5x3.78 inch

hole - 24x37 mm
hole - 0.94x1.45 inch



Material: Natural Leather, Cattle Hide - Vegetable Tanned. Hand painted. Polyester thread - waxed. order